Home & Living

Ideal indoor humidity in winter is 30% to 50%, per the EPA

30% to 50% relative humidity is the target for ideal indoor humidity in winter, based on the EPA's advice to keep homes below 60% and ideally between 30% and 50%.

Photo by Pascal DANIEL on Unsplash
In this guide

30% to 50% relative humidity is the target for ideal indoor humidity in winter, based on the EPA's advice to keep homes below 60% and ideally between 30% and 50%.

A humidity meter that costs about $10 to $50 tells you where your home actually sits, and fog on cold windows can be a sign that the room's humidity is too high.

The EPA's range and where it comes from

The range comes from the EPA's consumer guide "A Brief Guide to Mold, Moisture and Your Home," which was written to help households control moisture and mold. As of October 2026, the guide says: "If possible, keep indoor humidity below 60 percent (ideally between 30 and 50 percent) relative humidity."

That sentence holds two numbers. The EPA recommends keeping indoor humidity below 60%, and 30% to 50% is the ideal band inside that ceiling.

Two other federal consumer documents land on the same band. The EPA's "Care for Your Air" guide says to keep indoor humidity between 30% and 50% and to use a moisture or humidity gauge to check it. A 2012 CPSC publication on room humidifiers recommends 30% to 50% if possible and warns that levels above 60% may let moisture build up indoors and condense on surfaces.

ASHRAE is sometimes cited for humidity targets, but its public technical FAQ doesn't give a single winter number for homes. It says the comfort range under its Standard 55 depends on relative humidity, season, clothing worn, activity levels, and other factors. For a household that wants one number to check against, the EPA range is the one written for homes.

The EPA presents 30% to 50% as part of moisture and mold prevention. It doesn't describe the range as a way to treat or prevent illness, and this guide doesn't either.

This guide is general information, not medical advice. If you have concerns about your child’s health or safety, consult a pediatrician or another qualified professional. Follow product labels and manufacturer instructions. In an emergency in the United States, call 911. Elsewhere, use your local emergency number.

White hygrometer
Photo by Kaffeebart on Unsplash

Why winter heating dries the house out

Cold outdoor air carries very little water vapor, and warming it indoors lowers its relative humidity even further. Relative humidity is the amount of water vapor in the air compared with the most that air could hold at its current temperature. The amount of water in the air stays the same while the furnace raises the temperature, so that vapor now fills a smaller share of what the air could hold. The EPA and CPSC documents cited here don't explain this winter drop, so this section is general background on relative humidity, not agency guidance.

Every house trades air with the outside, through gaps around doors and windows, exhaust fans, and the ordinary opening of doors. In winter, the air coming in is cold and carries little moisture. Once the heat brings it up to room temperature, it reads as dry on the meter.

This happens in damp climates too. A cold, rainy day can feel wet outside while the air itself holds little water in absolute terms, because cold air can't hold much. Bring that air inside, heat it, and the relative humidity drops.

Homes also add moisture back. Showers, cooking, a pot of pasta water, laundry drying on a rack, and people breathing all put water vapor into the air.

Winter weather brings other jobs around the house. Our winter storm checklist for families covers getting the home ready.

How to check with a hygrometer

The EPA names a moisture or humidity meter, often sold as a hygrometer, and calls it "a small, inexpensive ($10-$50) instrument available at many hardware stores." The EPA's "Care for Your Air" guide says the same kind of gauge is available at most hardware stores.

The EPA passages quoted here don't say where to put the meter, so treat the following as common practice rather than EPA advice. Keep the meter away from anything that puts out heat or water vapor, such as a radiator or heat register, a humidifier, the bathroom door, or the stove. A meter on a cold windowsill reports conditions at the glass. A reading taken right after a hot shower mainly reflects that temporary moisture.

Reading What you may notice at home What the EPA guide says Next check
Below 30% Often nothing you can see; the meter is the main signal Below the ideal 30% to 50% band None given beyond the ideal band
30% to 50% The meter is the main signal Inside the ideal band None given in the EPA guide
50% to 60% Possibly condensation, which can be a sign of high humidity Under the 60% ceiling, above the ideal band Watch windows and walls after showers and cooking
Above 60% Condensation on windows, walls, or pipes Above the level to stay under Find and reduce the moisture or water source

The table has no separate low limit because the EPA guide doesn't give one beyond the ideal band. A single low reading on a cold morning is a reason to keep watching.

Condensation on windows can mean the humidity is too high

The EPA guide treats fog or droplets on the inside of windows as a warning. Its wording is short: "Condensation can be a sign of high humidity." The guide applies the same warning to condensation on walls and pipes.

When condensation appears, the EPA guide says to dry the wet surface and reduce the moisture or water source.

A fogged window is a sign and doesn't give a percentage. Check the meter when you see fog. If the number is high, bring it down, and if the number is in the band but the same window keeps fogging, the EPA advice to dry it and cut the moisture source still applies.

Moisture that stays on surfaces can lead to mold. Mold cleanup is outside this guide, and the EPA's mold pages cover it directly.

What about a baby's room?

The federal guides cited here don't set a separate number for a nursery, so the EPA's 30% to 50% band is the reference for a baby's room too. The EPA's "Care for Your Air" guide, for example, gives one household range and no infant-specific one.

The AAP's HealthyChildren.org site adds a caution about going higher. A 2011 page on dust mite control says: "Any increase in humidity, such as when a humidifier is used, will encourage mites and molds to grow in your child's room." That page is aimed at families of children with allergies or breathing problems, and it sends those decisions to the child's pediatrician.

We didn't find an infant-specific humidity target in the AAP consumer pages checked for this guide. That isn't the same as the AAP saying none exists.

If your baby or child has breathing problems or allergies, ask the pediatrician before using a humidifier for that reason.

Bedding is the other winter question in a nursery. Our guide on when a baby can sleep with a blanket covers the AAP guidance on age.

Humidifier cleaning per the manual

The CPSC's 2012 publication says to clean a room humidifier "well and often during the heating season," to unplug it before cleaning, and to follow the manufacturer's suggested cleaning methods. That makes the manufacturer's instructions the main reference for how to clean the unit.

Keep the manual near the humidifier, or save the model number so you can look it up. The CPSC points owners to the manufacturer for cleaning methods, and this guide doesn't give a cleaning recipe for that reason.

The CPSC recommends keeping home humidity between 30% and 50% if possible and warns that above 60%, moisture may build up indoors and condense on surfaces, where bacteria and fungi can settle and grow.

Choosing between humidifier types is a separate decision — the CPSC passages quoted here don't rank them. Follow the manufacturer's suggested cleaning methods.

If the humidifier runs in a child's room, our childproofing checklist by age covers the rest of the room.

Before the next cold snap, get a humidity meter and compare its reading with the EPA's 30% to 50% band.

Frequently asked questions

What is the ideal indoor humidity level in winter?
The EPA advises keeping indoor relative humidity below 60%, ideally between 30% and 50%. A humidity meter in the main living area shows where your home sits.
Can high humidity cause mold growth in winter?
It can contribute. A 2012 CPSC publication warns that humidity above 60% may let moisture build up indoors and condense on surfaces, where bacteria and fungi can settle and grow. The EPA's mold guide treats condensation on windows, walls, or pipes as a sign of high humidity and says to dry the surface and reduce the moisture source.
What should the humidity be in a baby's room?
The federal guides cited here give no separate nursery number, so the EPA's 30% to 50% household range is the reference. An AAP HealthyChildren.org page warns that any increase in humidity, such as from a humidifier, encourages mites and molds in a child's room. If your child has breathing problems or allergies, ask the pediatrician before adding a humidifier.
How can I increase humidity in my home?
The sources cited here discuss adding moisture with a room humidifier. If you use one, follow the manufacturer's manual, and clean the unit well and often during the heating season, as the CPSC advises. Keep watching the meter so the room stays under 60%.

Sources

All sources checked on October 31, 2026.

All Home & Living guides →

Home & Living

Why start radon testing at home in January?

By mid-January, the windows have been latched since Thanksgiving, and the kids play in the finished basement most afternoons. A radon test kit is still in its envelope.

Nov 2, 2026·9 min read